Important
MARTIN ENGINEERING HEREBY DISCLAIMS ANY LIABILITY FOR: DAMAGE DUE TO
CONTAMINATION OF THE MATERIAL; USER’S FAILURE TO INSPECT, MAINTAIN AND TAKE
REASONABLE CARE OF THE EQUIPMENT; INJURIES OR DAMAGE RESULTING FROM USE OR
APPLICATION OF THIS PRODUCT CONTRARY TO INSTRUCTIONS AND SPECIFICATIONS
CONTAINED HEREIN. MARTIN ENGINEERING’S LIABILITY SHALL BE LIMITED TO REPAIR
OR REPLACEMENT OF EQUIPMENT SHOWN TO BE DEFECTIVE.
Observe all safety rules given herein along with owner and Government standards and regulations. Know
and understand lockout/tagout procedures as defined by American National Standards Institute (ANSI)
z244.1-1982,
American National Standard for Personnel Protection - Lockout/Tagout of Energy Sources -
Minimum Safety Requirements
and Occupational Safety and Health Administration (OSHA) Federal
Register, Part IV, 29 CFR Part 1910,
Control of Hazardous Energy Source (Lockout/Tagout); Final Rule
.
The following symbols may be used in this manual:
DANGER
!
Danger
: Immediate hazards that will result in severe personal injury or death.
WARNING
!
Warning:
Hazards or unsafe practices that could result in personal injury.
CAUTION
!
Caution:
Hazards or unsafe practices that could result in product or property damages.
IMPORTANT
Important:
Instructions that must be followed to ensure proper installation/operation of equipment.
NOTE
Note:
General statements to assist the reader.
