Martin Engineering M4097-05/18
3
Martin
®
Air Cannon Controller - multiple circuit
Before Installing Controller
1. Remove controller from shipping box.
2. If anything is missing or damaged, contact Martin Engineering or a
representative. Keep any damaged goods subject to examination.
WARNING
!
Before installing equipment, lock out/tag out energy source to
hopper, conveyor, and/or conveyor accessories.
3. Turn off and lock out/tag out energy source according to ANSI standards
(see “References”).
WARNING
!
If equipment will be installed in an enclosed area, test gas level
or dust content before using a cutting torch or welding. Using
a cutting torch or welding in an area with gas or dust may
cause an explosion.
4. If using a cutting torch or welding, test atmosphere for gas level or dust
content.
Before Installation
