Introduction
7
Introduction
This Installation and Safety Manual explains how to install, configure and maintain Martin™ LC
Plus™ video panels. The Safety section contains important information about safety precautions.
The installation section contains details of how to physically install panels and cables, connect
panels to power and prepare for connection to a Martin™ P3-100™ System Controller and video
source.
For information about installing and using the P3-100 System Controller, see the P3-100 user
documentation supplied with the P3-100.
All LC Plus Series and P3-100 user documentation is also available for download free of charge from
the Product Support area at www.martin.com
Thank you for selecting the Martin™ LC Plus, a product from the LC™ Series of modular LED-based video
display panels from Martin™. This product features:
• 40 mm pixel pitch (seamless image at approx. 30 m)
• 3000 Cd/m2 (3000 nits) effective light output at 25° C (77° F)
• Rich RGB color
• 25 x 50 pixels (LC Plus 2140) or 25 x 25 pixels (LC Plus 1140) per panel image resolution
• Color resolution of 16 bits per color
• 100° x 40° viewing angle
• Silent convection cooling
• P3 signal in/out via 'daisy-chainable' Amphenol IP67-rated ruggedized bayonet-mount RJ-45 connectors
• Auto-sensing 200 - 240 VAC nominal switch mode power supply
• Amphenol IP67-rated ruggedized threaded locking power connectors
• Prolyte CCS6 conical coupler system for fast installation
For the latest firmware updates, documentation, and other information about this and all Martin
Professional™ products, please visit the Martin website at http://www.martin.com
Comments or suggestions regarding this document may be e-mailed to [email protected] or posted to:
Technical Documentation
Service Department
Martin Professional A/S
Olof Palmes Allé 18
DK-8200 Aarhus N
Denmark
Warning! Read “Safety Information” on page 3 before installing, powering, operating or
servicing the LC Plus.
This is an ITE Class A product. In a domestic environment this product may cause radio interference, in
which case the user may be required to take appropriate measures.
Unpacking
LC Plus Series products are packaged either in sets of 4 panels in a 4-unit flightcase or as single panels in
a cardboard box. The following items are included.
In the cardboard box:
• 4 x conical couplers (Prolyte CCS6 system): P/N 21021150
• 8 x threaded spigots* for LC Plus conical coupler: P/N 08330127
• 8 mm hex key for threaded spigots: P/N 50520619
• 5 m (16.4 ft.) power input cable with IP67 input connector for single-phase power: P/N 11521030
• 5 m (16.4 ft.) power input cable with IP67 input connector for 2-phase power: P/N 11521034
• 1.5 m (4.9 ft.) power throughput cable with IP67 connectors for single-phase power: P/N 11521031
• 1.5 m (4.9 ft.) power throughput cable with P67 connectors for 2-phase power: P/N 11521033
