10 Quick
Start
Quick Start
You are no doubt eager to switch on the machine and try it out by making a lot of
haze. This section tells you how to do that. However, please also make the time
to read the safety and servicing instructions in the remainder of this manual.
Setting up
Locate the machine in a suitably large area with nothing in front of the haze
output.
Fill the fluid tank with Martin C-Plus Haze Fluid™ only.
Use of other fluid will
void the warranty.
Connect a suitably rated power supply to the machine using the supplied Neutrik
Powercon cable. The power requirements are:
3.1A @ 230V (EU model)
6A @ 120V (US model)
Now set the mains switch, at the rear of the machine, to the ‘ON’ position. The
display will show HEAT. If the display shows OFF press the RUN button (bottom
right hand button) on the digital control panel. After about 6-8 minutes the display
should show CONT and the machine will begin producing haze. If the display
shows RDY press the RUN button to start haze.
Making haze
The two quick access buttons at the bottom left of the control panel automatically
select different haze densities. The SILENT button enables or disables a quieter
run mode. The RUN button starts and stops haze production.
If you want to adjust the haze density manually, press the Menu < > buttons until
the display shows HAZE, then press the Enter button and use the Value up/down
buttons to select a value above 0%.
You can also adjust the fan speed using the FAN menu.
If no haze is produced it may be necessary to prime the
machine, press the Menu <> buttons until the display
shows PRME, then press the Value Up button so the
display shows Y, then press the Enter button.
Switching off
The Hazer Pro is designed to run a self-cleaning cycle on power down to help
prevent blockages, using its built in rechargeable battery. When you turn off the
power the cleaning cycle will begin automatically if required.
If cleaning is needed, the display will show “WAIT”, then “90” counting down to
“00”. The machine will then power off automatically.