Martin ExteriorWash 200 Series, Руководство пользователя

Страница: 25 / 32

Exterior Wash
TM
200 Series User Manual
25
Troubleshooting
Problem Probable cause(s) Remedy
Fixture is completely dead. No power to fixture.
Primary fuse blown.
Check power source and connections.
Isolate fixture from power. Contact
Martin™ Service for assistance.
One or more fixtures responds
incorrectly to control or does
not respond at all. Incorrect DMX addressing.
Incorrect channel mode.
Fault on DMX link.
Electromagnetic interference
on DMX link
Fixture defective.
Other device on DMX link
defective.
Check number of DMX channels
required by each fixture and check
DMX addresses on fixtures and DMX
controller.
Verify CHANNEL MODE setting.
Inspect connections and cables.
Correct poor connections. Repair or
replace damaged cables.
Move cables away from any strong
electromagnetic fields.
Have faulty fixture serviced by
Martin™
Service.
Bypass devices on DMX link until the
faulty device has been identified. Have
faulty device serviced by Martin™
Service or device supplier.
LEDs cut out intermittently. Fixture is too hot. Ensure free airflow around fixture.
Clean fixture.
Check that ambient temperature does
not exceed maximum permitted level.
Contact Martin™ Service for
assistance.