Martin ExteriorWash 200 Series, Руководство пользователя

Страница: 16 / 32

16
Exterior Wash
TM
200 Series User Manual
Setup
Warning! Read ‘Safety information’ on page 5 before operating the fixture.
This section explains the fixture settings and utilities that the user has access to via the
control panel. Settings are retained when the fixture is powered off. A full map of the control
menu including default settings can be found on page 22. Some settings and functions are
also available by RDM.
Accessing and navigating the control menus
The control panel is located on the back of the fixture. The display can be hidden to deter unauthorized
access by the display cover plate, included. Use of the cover plate is optional and not required for weather
protection.
To access the control menus, press and hold the MENU button. If prompted for a password, use the arrow
buttons to scroll to the 3-digit password and press ENTER when the password is displayed. For more
information about password protection of the control menu, see page 19.
Navigate the menu structure using the ENTER, DOWN ARROW (
▼)
and UP ARROW (
▲)
buttons. Press
ENTER to select and save the desired menu option. To return to the previous level in the menu structure
without making a change, press MENU.
To exit the menus, press and hold MENU.
DMX settings
Channel mode
The Exterior Wash 200 and Exterior Wash 210 can be set to use either four or five DMX channels. The four-channel mode
is the default. It provides individual control of the red, green, blue, and white levels. The five-channel mode adds dimming
control that allows you to vary the intensity without having to change individual color levels.
The channel mode may be set from the control panel or by RDM. To set the Exterior Wash 200 or Exterior Wash
210 channel mode from the control panel:
1. Press and hold the MENU button to access the control menu. If prompted for a password, press the
arrow buttons to scroll to the 3-digit password. Press ENTER when the password is displayed.
2. Use the UP and DOWN buttons to select FIXTURE CONFIG from the menu. Press ENTER.
3. Select CHANNEL MODE and press ENTER.
4.
The fixture’s channel mode setting is displayed. To change the mode setting, press the UP or DOWN
button.
5. Press ENTER to store the channel mode setting.
6. Press MENU to exit.
DMX address
The Exterior Wash 200 and Exterior Wash 210 use four or five DMX channels, depending on channel mode. The Exterior
Wash 220 uses three DMX channels. The DMX address, also known as the start channel, is the first channel
used to receive instructions from a DMX controller. If a fixture that requires 4 DMX channels has its DMX
address set to 1, for example, then it uses channels 1, 2, 3 and 4. The next fixture can have its DMX
address set to 5, the next to 9 and so on until the 512 channels in one DMX universe are allocated.
For independent control, each fixture must be assigned its own control channels. Two fixtures of the same
type (and set to the same channel mode) may share the same address and control channels if identical
behavior is desired.
The DMX address may be set from the control panel or by RDM. To set the fixture
’s DMX address from the control
panel:
1. Press and hold the MENU button to access the control menu. If prompted for a password, press the
arrow buttons to scroll to the 3-digit password. Press ENTER when the password is displayed.
2. Use the UP and DOWN buttons to select DMX ADDRESS from the menu. Press ENTER.
3.
The fixture’s DMX address setting is displayed. Press the UP or DOWN button to scroll to the desired
DMX address.
4. Press ENTER to store the DMX address setting.
5. Press MENU to exit.