TRANSPORT AND VACUUM OPERATION
The Run Button will start the Transport in any given mode. When pressed it will
also turn the air portion of the pressure pump on. Press it again to stop the
transport and turn of the pump. Each Mode has a timeout feature to preserve
the life of the machine.
The Feed Button is what controls the suction portion of the feeder. Press it once
to turn pulse feed action. This is controlled by a sensor just before the perf shaft
that tells the machine to turn the suction off until the end of the sheet is
reached. The concept of this is that the machine will only feed one sheet at a
time. Providing better registration when in Crease Mode.
The Stream Button is designed as a turbo button for when in perf mode and
running faster. This button opens the valve and provides continuous suction.
A document may be slowly advanced through the transport by pushing and
holding one of these buttons. These will not turn on the pump.
EXAMPLE:
The motor should advance transport at slow speed
and stop whenever your finger is lifted.
Controls on-off function of motor.
EXAMPLE:
Machine will run at mode and speed previously selected.
Machine will stop.
1
4
