WPM System
USER GUIDE
WPM
User Guide v1.0
Page 33
WPM Universal Bracket
The Universal Bracket enables an array of up to four WPM cabinets to be pole-mounted on an MSX Passive, SX118, or SX218
subwoofer using the Variable Height Pole at a range of tilt angles from 0° to -18°, or an array of up to four WPM cabinets to be
flown from a truss-mounted scaffold clamp. It provides rigging points for WPM cabinets at the front, a rigging point at the rear,
and continuously variable angle adjustment from -18° to +18° by means of a handwheel.
The bracket’s fixing is via a single 13 mm dia. hole, which is fitted with a ASF20045 Pole Mount Adapter to fit the Variable Height
Pole. By replacing the Pole Mount Adapter with a scaffold clamp, the bracket can also be used inverted, to fly a single four
cabinet WPM array (without an MSX Passive subwoofer). The cross member at the front must be inverted, and always used
with the single tab upwards and the double rigging tabs downwards. Note that it is not possible to mount more than four WPMs
on a Variable Height Pole by any method, and that the Flying Frame must be used to fly all other system configurations.
Содержание MSX Passive
Страница 1: ...User Guide WPM Optimised Line Array...
Страница 39: ...WPM System USER GUIDE WPM User Guide v1 0 Page 39 Fig 18 insert rigging pin Fig 19 insert rigging pin...
Страница 44: ...WPM System USER GUIDE WPM User Guide v1 0 Page 44 Fig 32 attach sixth cabinet Fig 33 complete ground stack...
Страница 56: ...WPM System USER GUIDE WPM User Guide v1 0 Page 56 Fig 70 complete array Fig 71 complete array...
