Q Series Operation Manual
9
amplifier can be turned on using the front panel
power switch. The amplifier then goes through a
soft-start sequence as it self-checks its circuits. The
fans will blow at high speed before dropping to idle,
and the “power” LED will illuminate.
Inrush power is controlled and limited during “soft
start”, enabling multiple amplifiers to be powered up
simultaneously.
5.5 Grounding
There is no ground lift switch or terminal on the
Q Series
amplifiers. The signal ground is always
floating, via a resistor, to chassis and therefore the
grounding system is automatic.
In the interests of safety, never disconnect the earth
(ground) pin on the AC power cord.
Use balanced input connections to avoid hum and
interference.
INsTALLATION 5
All material © 2007. Martin Audio Ltd. Subject to change without notice.
