![background image](http://html1.mh-extra.com/html/martin-audio/em186/em186_user-manual_1733152003.webp)
3.1
EM26
The EM26 is a miniature high performance loudspeaker suited to a variety
of applications from sports bars to high level foreground systems. It is a
passive two-way system featuring an 8" (200mm) bass driver and a 1"
(25mm) ferrofluid cooled HF driver on a 70 x 50 horn.
3.2
EM56
The EM56 is an ultra-compact passive two-way system with a high output
capability for its small size. Featuring a 10" (250mm) bass driver and 1"
(25mm) compression driver on a 70 x 40 degree horn, it is particularly
useful in distributed sound and audio-visual appplications.
3.3
EM76
The EM76 is a powerful stand-alone system combining dynamic full-
frequency performance with exceptional smoothness. Designed to meet
the install requirement for a 12" (305mm) bass driver plus 1" (25mm)
compression driver combination, the EM76 is a passive 2-way system that
is ideal for most applications.
3.4
EM186
The EM186 is an innovative three-way system featuring a powerful 15"
(385mm) low frequency driver. Midrange is produced by a unique 6.5"
(160mm) mid horn developed to overcome the power and distortion
limitations of traditionally used large format compression drivers and high
frequencies are produced by a 1" (25mm) compression driver. Mid and HF
dispersion patterns are 65 x 40 degrees and the mid/high section is
rotatable to enable vertical or horizontal installation. The EM186 is
designed for bi-amplification at its 650Hz low/mid crossover point.
3.5
EM201 and EM251
Where an EM Series enclosure requires additional low frequency
enhancement, use of either the EM201 or EM251 will extend the power
bandwidth of the system to below 35Hz. The EM201 houses a single 18"
(450mm) driver whilst the EM251 utilises twin 15" (385mm) drivers in an
optimally tuned compact reflex enclosure.
NOTE:
Passive systems such as the EM26, EM56 and EM76 may be used without
a system controller provided recommended amplifier power is not exceeded
and care is taken to avoid amplifier clipping. Use of an optional EMX1A
controller with its system specific low frequency EQ and built in limiters will
result in improved bass response and system protection.
Martin Audio – EM SERIES
E
NGLISH
3
CONTENTS
<
>
GUIDES