8
SYSTEM CONFIGURATIONS
The EM26, EM56, EM76 and EM186 may be used to cover the full-frequency
range – either distributed singly or arrayed in multiples. The EMX1A
controller provides appropriate limiting and low frequency equalisation for
full-frequency operation of the EM26, EM56 and EM76. The EM186 requires
an EMX2A controller.
Where additional low frequency output is required, an EM201 or EM251
sub-bass system driven from a separate amplifier fed from the sub-bass
output of the controller can be added. In this case the controller should be
switched from full-range to sub-bass operation by means of the recessed
switch on the front panel. The sound balance of the complete system can
be set up by using a screwdriver to adjust the trim controls accessible
through the controller front panel. Please refer to the EMX1A or EMX2A
User’s Guide for further information.
9
WARRANTY
Martin Audio EM Series products are warranted against manufacturing
defects in materials or craftsmanship over a period of 5 years from the date
of original purchase. During the warranty period Martin Audio will, at it's
discretion, either repair or replace products which prove to be defective
provided that
the product is returned in its original packaging, shipping prepaid, to an
authorised Martin Audio service agent or distributor.
Martin Audio Ltd. cannot be held responsible for defects caused by
unauthorised modifications, improper use, negligence, exposure to inclement
weather conditions, act of God or accident, or any use of this product that is
not in accordance with the instructions provided by Martin Audio.
Martin Audio is not liable for consequential damages.
This warranty is exclusive and no other warranty is expressed or implied.
This warranty does not affect your statutory rights.
Martin Audio – EM SERIES
E
NGLISH
6
CONTENTS
<
>
GUIDES
