![background image](http://html1.mh-extra.com/html/martin-audio/blackline-f8/blackline-f8_user-manual_1732966005.webp)
All material © 2007. Martin Audio Ltd. Subject to change without notice.
recommends an M3
+
, DX1, DX2 or Engineer system controller configured to perform EQ and limiter
functions.
The M3
+
, DX1, DX2 or Engineer system controller may also be used to configure systems for additional
sub-bass cabinets – e.g. F10
+
+ S12
+
, S15
+
, S18
+
or S218
+
combinations.
F12
+
The Blackline F12
+
is a high power, compact two-way system with a new, vented-chassis, 12” (300mm) LF
driver and a new 1” (25mm) exit compression driver mounted on a rotatable 80° x 50° constant directivity
HF horn.
The LF driver has a tough, water resistant cone and features a high BL motor with a flat-wire copper coil
and an aluminium demodulating ring. This reduces intermodulation distortion and improves midrange
performance when driven hard. Increased excursion is available by virtue of a triple roll surround and deep
motor structure.
The directivity of the LF driver has been matched to the HF horn in the crossover region by improved
crossover design and cone profile optimisation, also the new HF compression driver utilises an ultra-
lightweight Kapton diaphragm for extended high frequency response.
The F12
+
may be used with or without a system controller. For demanding applications, Martin Audio
recommends an M3
+
, DX1, DX2 or Engineer system controller configured to perform EQ and limiter
functions.
The M3
+
, DX1, DX2 or Engineer system controller may also be used to configure systems for additional
sub-bass cabinets – e.g. F12
+
+ S15
+
, S18
+
or S218
+
combinations.
F15
+