background image

9

Re Emptying the Thatch 

Collection Bag

Empty the thatch collection bag frequently during use. Do not 

wait until it is completely full. We recommend emptying it when  

it is half full.

1.  Lift the thatch collection bag cover and pull the thatch 

collection bag off the mounting hooks to remove it.

2.  Empty the bag's contents into a suitable waste receptacle. 

Mount the bag back into position before resuming work.

Operation

Cutting Depth Adjustment

m

WARNING!

 The unit must be switched off and 

disconnected from the power supply before adjusting the  

tine settings.

Adjust the depth according to the needs of your lawn. The 

most suitable depth depends on the kind of lawn and the 

actual height of the grass.

1.  Push the depth adjustment lever towards the wheel, then 

move it forward or backward to adjust the cutting depth 

(Fig. 8).

2.  Adjust the lever to one out of five stages. Read the 

adjusted depth from the scale (Fig. 9).

Power Connection

Push a loop of the extension cord through the slot on the 

extension cord restraint holder from the opposite side of the 

restraint holder (Fig. 10). Insert the appliance cord into a proper 

outdoor extension cord (see Extension Cord Chart on page 2).

Fig. 8

Depth 

adjustment 

lever

Wheel

R

Fig. 9

Fig. 10

Extension 

cord restraint 

holder

Extension 

cord

Scale/

Position

1

high

10 mm

do not use for scarifying

do not use for scarifying

for pushing behind with the machine; and 

removing thin thatch layers

transport, storage and scarifying

use for scarifying

use for scarifying

transport, storage and raking

raking healthy lawn

not recommended for raking

do not use for raking

2

minimal

middle

deep

deep

5 mm

0 mm

-5 mm

-10 mm

3

4

5

Setting

Depth

Scarifying

Raking

Application

Содержание MTS-DTS13

















Отзывы: