Martellato CHOCOBIGEV, Руководство пользователя

Страница: 23 / 76

23
CHBG00EV - ENGLISH
Temperature hazard precautions
Electrical hazard precautions
If you require parts repaired or replaced, please contact
the Martellato srl customer support department
Check daily that the power cord:
- is in good condition and the insulation is not damaged.
- the insulating outer housing has not suffered physical or heat damage.
The thermal risk plate is applied on the surface side of the base
Use protective gloves for the thermal contact
During all activities carried out with
CHOCOBIGEV
Thermal risk plate in relation to the temperatures reached by the heating
surface in the absence of the chocolate load
Keeping the nameplates described above in good condition is essential for product
safety. If they have deteriorated or become illegible, please order new ones from the
fountain manufacturer.
Attached hereto is a copy of the EC declaration of conformity.
During heating without chocolate the concave surface of the base and pan reach high
temperatures.
Do not touch and prevent accidental contact during this preparatory phase.
During operation, the parts inside the motor base and steel tank can become
dangerously hot.
WARNING
HOT SURFACE
• Cool all parts before disassembling.
• Pay attention to overturning dangers and to temperature of the fountain and chocolate surfaces.
• In case of accidental overturning, operate wearing thermal gloves as a precautionary measure.
• Before plugging the appliance into the mains, check that the mains voltage is the same as that laid down for the
fountain and that the connection to the protective conductor (earthing) is efficient and reliable
• Do not use the appliance with a damaged cord or plug or in case of failures or breakage.
• Never immerse the appliance, the cord or the plug in water or other liquids to avoid electrical hazards.
• Remove the power supply plug without pulling the cord when the unit is not in use or before dismantling the
various parts for cleaning.
• Do not use near water.