Marta MT-4557, Руководство пользователя

Страница: 6 / 10

6
•
This kettle is designed for Household use only! Do not use outdoors.
•
When not in use and before cleaning, disconnect the kettle from the outlet. Allow the kettle to cool completely before attempting to clean.
•
Do not remove the lid during the heating cycle. Scalding may occur.
• Do not operate the kettle without water. If the unit overheats, please allow the unit to cool for at least 15 minutes.
•
Do not fill above the MAX line; this may cause water to overflow, which may cause scalding.
•
Steam may damage walls or cabinets, during use turn the spout away from walls toward an open space; use heat resistive pads under the kettle to prevent damage to wood finishes.
•
Do not place or use the unit on or near a hot gas or electric burner or in a heated oven.
• Never operate the appliance when the lid is open or removed.
•
To remove from the power source, turn the unit OFF and pull the plug from outlet. Never pull by the cord.
•
To reduce the risk of fire or electrical shock, do not remove the bottom cover.
•
Do not use for kettle for other than intended use.
• To prevent discoloration, do not place tea bags, coffee, instant noodle, or any other liquids or items inside the kettle.
•
Do not wash under direct running water as this will damage the control panel. Clean with a soft moist cloth.
•
Do no use or store the unit in direct sunlight or near other heat sources (oven, stove, etc.).
•
The kettle may have difficulty bringing water to boil when used in high altitudes or extreme cold conditions.
• Do not disassemble or attempt to repair on your own.
PLEASE SAVE THiS INSTRUCTION!
BEFORE FIRST USE
Remove all packaging materials.
Fill kettle to the MAX line and bring to a boil. When the unit completes the boiling cycle, discard the water - repeat the process 2 to 3 times. This will remove any dust or residue remaining from the
manufacturing process.
OPERATION
BOILING WATER
1. Remove the unit from base. 2. Open the lid. 3. Fill the kettle with your desired amount of water, but not less than MIN line. Do not fill above the MAX line. Water scale is inside of kettle.
4. Close the lid. 5. Place the kettle on base, ensuring that it is correctly engaged. 6. Connect cord to power outlet, turn the temperature adjusting knob to the right till the end and switch unit ON by
pressing “On/Off” button; indicator lights up. 7. The kettle will switch off automatically when water has come to a boil, the light indicator will turn off.
HEATING WATER TO SELECTED TEMPERATURE & KEEP WARM MODE
This mode allows you to heat up water and keep it warm as long as you desire.
Place the kettle onto the power base, choose desired temperature of water (40 - 90°C
）
by turning the temperature adjusting knob, then press “On/Off” button, kettle will start to heat up the water to the
selected temperature. When finished, kettle will stop heating, but will not switch off automatically; light indicator will turn off. When the water has cooled by about 10°C, heating to the desired water
temperature will start again; the indicator lights up. Warning! The Kettle will not switch off automatically when it’s in Keep warm mode. To switch off you must use “On/Off” button.
To stop boiling, heating or keep warm mode, press ON/OFF button.
After use, unplug and empty unused water. Ensure kettle is switched off before removing from base. Heating can be stopped at any time by the operating the switch. As a safety feature, the unit may
not start immediately after shutting off. Please allow 15 to 20 seconds for kettle to cool down before switching on again. If kettle ever boils dry, please wait 15 minutes for unit to cool before refilling with
cold water. The safety cut-off will automatically reset during this time. Do not open lid when in operation. Steam escaping from the spout is hot. This appliance is only suitable for heating water; do not
use any other liquids. A minimum of 0.5L of water must be used to prevent overheating.