![background image](http://html1.mh-extra.com/html/marta/mt-2659/mt-2659_user-manual_1732037008.webp)
MT-2659
8
BUTTONS INSTRUCTION
ON/OFF button:
You can switch the machine on and off by one pressing of the button.
First pressing is on and enter into low intensity
Second pressing is middle intensity.
Third pressing is high intensity.
The fourth pressing is off the machine.
OPERATION INSTRUCTION
First Operation, put unit in the room temperature for half of an hour before running.
It is recommended to use the unit under temperature of 20 degree C, relative humidity less than 80
%
RH.
Use clear water not over 40 degree C
Check the water basin, make sure it is clear.
Connect the power plug and switch on the unit (NEVER RUN THE UNIT WHEN THERE IS NO WATER IN WATER BASIN), the main connection lamp will be on. The unit starts working.
INSTRUCTIONS TO USAGE:
Put the machine on a flat surface.
Take the water tank out of the unit, open the water tank cover and fill the tank with clear water. Close the cover and put the tank onto the base unit carefully..
Put the nozzle and top cover into the socket on top of the water tank.
Check if the rated voltage meets the input voltage, and plug into the socket
Touch the machine button On/OFF
, the machine begins to work with mist output with low speed.
Touch speed, it have low, middle, high mist for your adjustment.
Once the water in the basin is too little to keep the machine working, the machine will automatically alarm 3 seconds and then stop working. The water tank background light of red LED. Refill the
water, and the machine will restart.
CLEANING AND MAINTENANCE
ATTENTION!
Always switch off and unplug the unit before cleaning.
You can ensure many years of trouble free operation of your humidifier by following a few simple maintenance procedures. If your water is hard, containing high concentrations of calcium and other minerals,
then over a period of time white dust will start to deposit on the various surfaces in the room. A white, film-like substance will also start to develop in the water basin, on the transducer and on the inner surface
of the water tank. This white film will impede the proper function of the transducer and the operation of the machine.
Содержание MT-2659
Страница 3: ...MT 2659 3 40 0 30 5 40 80...
Страница 4: ...MT 2659 4 40 20 1 2 3 4 5...
Страница 5: ...MT 2659 5...
Страница 12: ...MT 2659 12 KAZ 5 90 36 2...