Marson MT581W Скачать руководство пользователя страница 186

Страница: 186 / 201

Save/Cancel Barcodes

After reading numeric barcode(s), you need to scan the

Save

barcode to save the data. If you scan the wrong digit(s), you

can either scan the

Cancel

barcode and then start the configuration all over again, or scan the

Delete the Last Digit

barcode and then the correct digit, or scan the

Delete All Digits

barcode and then the digits you want.

For instance, after reading the

Maximum Length

barcode and numeric barcodes “1”, “2” and “3”, you scan:



Delete the Last Digit:

The last digit “3” will be removed.



Delete All Digits:

All digits “123” will be removed.



Cancel:

The maximum length configuration will be cancelled. And MT581W is still in the setup mode.

Save

Cancel

Delete the Last Digit

Delete All Digits

Содержание MT581W










































































































































































































Результаты поиска

Содержание MT581W

Отзывы:

Marson MT581W, Руководство пользователя, Страница: 186 / 201

Результаты поиска

Содержание MT581W

Отзывы: