Marshall Headphones STANMORE, Руководство пользователя, Страница: 17 / 38

TROUBLE SHOOTING STANMORE
PROBLEM CAUSE ACTION
THE ACTIVE LOUD-
SPEAKER WILL NOT
TURN ON.
THE SOUND IS WEAK
OR THERE IS NO
SOUND AT ALL.
THE SOUND IS
DISTORTED.
SHARP CRACKLING/
CLICKING ON STRONG
PASSAGES/TRANSIENTS.
ERRATIC PERFOR-
MANCE.
The power cord is not plugged into a
working wall socket or not plugged into
the power jack on the back of the active
loudspeaker.
The 3.5mm cord/input cable/signal cable is
not correctly connected to either the active
loudspeaker or the music player.
The volume level is too low on the active
loudspeaker.
The volume level is too low on the music
player.
The volume level is too high.
The original sound file (mp3) is of poor quality.
Excessive playback volume.
Too much bass/treble boost.
Clipping when the amplifier runs out of
power.
Interference from
another source or
electronic device.
Plug the power cord into a working wall socket and plug the connector
into the power jack on the back of the active loudspeaker.
Unplug and re-plug the 3.5mm cord/input cable/signal cable into
both the active loudspeaker and the music player.
Turn up the volume on the active loudspeaker.
Turn up the volume on the music player.
Turn down the volume.
Try another sound file (mp3) or music player.
Turn down playback level on the volume knob or reduce the sound level
on the music player.
Turn down the volume control on the control panel and/or music player.
Reduce the bass boost on the control panel or excessive bass boost/eq on
the music player.
Turn down the volume on the speaker or on the music player.
Reduce the bass boost.
Move the active loudspeaker to another spot or turn off or move
other electronic devices.
028.