Marshall Electronics VS-570-HDSDI, Руководство пользователя

Страница: 38 / 54

VS-570-HDSDI User Manual
2.0 Megapixel Speed Dome Manual
38/54
SNMP

The VS-570-HDSDI can be used as an SNMP agent. It is compatible to both SNMPv1 and
SNMPvec. Settings for using SNMP (Simple Network Management Protocol) are as follows:
-
SNMP Listen Port: This port is used for connecting external devices when the system operates
as an SNMP client. SNMP is not used when setting a 0 value.
- SNMP Trap Destination IP : Set the SNMP Trap Destination IP.
- SNMP Trap Destination Port: Set the SNMP Trap Destination Port. SNMP is not used by setting 0
value.
Multicast

Multicast IP
The multicast IP address selection range is between 224.0.1.0 and 238.255.255.255. The selection can
be used only when media protocol is set to Multicast. The Multicast menu is used for the Multicast
connection request from a decoder or CMS / NVR software to transmit Multicast stream to the decoder
or CMS / NVR software. The multicast address must be the same for the system to be connected using
multicast protocol.
DDNS
Select the DDNS (Dynamic DNS) server to use. One of these two servers can be selected.

True DNS: TrueDNS service is used in this mode. Systems can be registered on the website for
TrueDNS service: http://ns1.truecam.net . System will get a domain name of xxx.truecam.net style.
Please, refer to the user guide document for True DNS service.

DynDNS: DynDNS service is used in this mode. Refer to www.dyndns.org for details. ID, Password
and Domain name are needed when DynDNS is set.
Simple Network Management Protocol (SNMP) is used by network management systems to
communicate with network elements. SNMP lets TCP/IP-based network management clients use a
TCP/IP-based internetwork to exchange information about the configuration and status of nodes.
SNMP can also generate trap messages used to report significant TCP/IP events asynchronously to
interested clients. For example, a router could send a message if one of its redundant power supplies
fails or a printer could send an SNMP trap when it is out of paper.
Dynamic DNS is a method, protocol, or network service that provides the capability for a networked
device, such as a router or computer system using the Internet Protocol Suite, to notify a domain
name server to change, in real time (ad-hoc) the active DNS configuration of its configured
hostnames, addresses or other information stored in DNS.