4.
Remote Configuration
User Manual VS-104-3GSDI – V1.0
Page 43 of 67
3/2016
Schedule
Event Type
Three recording modes are supported:
Continuous, Event,
and
Disconnect
.
When using Event Recording, Event Types can be selected among several Events.
Selected Event Type
is used for configuring the Schedule Table. Up to 4 Event
Types can be configured and each Event Type can be a combination of
Sensor,
Video Loss
and
Motion Event
.
Pre-Event Time
Specify the duration of recording before an Event happens.
Post-Event Time
Specify the duration after the Event is cleared.
Schedule Table
Actual
Recording Mode
is determined by
Schedule Table
, where the Recording
Mode is configured by Day and Hour. Recording Modes are configured as follows:
Record Off
No Recording.
Continuous
Records continuously.
Disconnect
Recording is started when the system loses connection to the last client (Decoder,
VMS/NVR) etc. When there are multiple clients and only one is disconnected, the
recording is not started.
Event Type
A recording is started when an Event is configured in the Event Type.
