Marshall Electronics V-R902DLW, Руководство по эксплуатации

Страница: 24 / 36

24
Press RotoMenu ™ knob to edit the IMD Name. Rotate the RotoMenu ™ knob to move the cursor. Press the RotoMenu ™ knob
with the cursor on the character to be changed, then rotate the knob to scroll through the character set . Press the
RotoMenu ™ knob to choose a character.
■
IMD Tally Mode
Use this setting when using Image Video tally control. Choose one of the following settings, in conjunction with the Image
Video controlling device.
T1, T2, T1T2, T2T1, T1-, T2-, T1T2-, T2T1- . Consult Image Video documentation for further
information.
IMD Fixed Config Submenu
■
IMD Fixed Color
Use this setting to choose the color of the IMD Fixed String text (see below). Available colors are red , green , and yellow . This
setting does not affect text color when using IMD text via the Image Video or TSL v4.0 protocols (text color is set via the
protocols).
■
IMD Fixed Align
Use this setting to choose the horizontal alignment of the IMD text. IMD text can be justified on the left , center or right of the
screen. This setting is overridden when using IMD text via the Image Video protocol (alignment is set via Image Video
protocol).
■
IMD Fixed String
Use this setting to display static IMD text on the screen. This setting is used to enter IMD text locally, when a serial protocol is
not used for remote control. The IMD Fixed String is saved after power cycle. The IMD Fixed String will be overridden by serial
protocol commands.
Press RotoMenu ™ knob to edit the IMD Fixed String. Rotate the RotoMenu ™ knob to move the cursor. Press the RotoMenu ™
knob with the cursor on the character to be changed, then rotate the knob to scroll through the character set . Press the
RotoMenu
™ knob to choose a character. The '¬' character indicates an unused (NULL) value in the string. The string entered will
IMD Fixed Configuration Submenu