Marshall Electronics V-R902DLW, Руководство по эксплуатации

Страница: 21 / 36

21
When the Tally Source is set to TSL/MEI 422, OSD Tally can be set to Off or IMD :
• Off On-screen tally is disabled
• IMD Red, yellow, and green tally is displayed according the protocol commands. Green, red, and yellow colors are
shown individually on either the bottom left or right of the screen.
■
LED Tally
Use this to enable or disable the physical LED tally on the top of the monitor.
■
Anc. Timecode
Use this setting to enable time code display on the screen. Time code is de-embedded from the vertical ancillary data (VANC)
within the HD/SDI signal. Two types of time code can be selected to display on the screen:
LTC (linear time code) or VITC
(vertical interval time code) .
The position of the time code display varies based on the aspect ratio setting and presence of IMD text.
■
Audio Monitor
Use the Audio Monitor menu option to enable or disable the audio presence indicator icon. When enabled, this icon indicates
whether embedded audio is present in the HD/SDI video input. A red circle and cross will flash on the icon if no embedded
audio is present.
■
CC Monitor (Closed Captioning)
Use the CC Monitor menu option to enable or disable the Closed Captioning presence indicator icon. When enabled, this icon
indicates the presence of 608 and/or 708 embedded Closed Captioning in the SDI video input. A
green dot indicates the
presence of CC Data. A red dot indicates no captioning data.
Embedded Audio Present No Embedded Audio
No CC Data present
CC
608
708
Both 608 and 708 CC Data present
CC
608
708
00:00:00:00
Time Code display
Hours Minutes Seconds Frames