16
■
Peaking (Focus assist)
The Peaking Filter is used to aid the camera operator in obtaining the sharpest possible picture.
You can turn the Peaking filter ON and adjust the Threshold and Color by accessing the Adjust function. Use the BRIGHT knob to adjust the Threshold. Adjusting the
Threshold to a higher value forces the Peaking algorithm to react quicker to objects that are in focus. Use COLOR knob to adjust the Color. Your choice is are Red
(default), Yellow, Pink, Green and Blue.
■
Clip
The Clip function is used to visually filter data on the screen that is under a Lower Threshold or over an Upper Threshold. Data on either side of the filters can be filtered
with a custom color.
The Lower Threshold numerical value and color can be adjusted using the BRIGHT and COLOR knob, respectively.
The Upper Threshold can be adjusted using the CONTRAST and USER knob, respectively.
In the image above, the Lower Threshold has been set to 20 IRE (Red). This means that any part of the image UNDER 20 IRE will be “colored” in RED. Also, the Upper
Threshold has been set to 90 IRE (Yellow). This means that any part of the image OVER 90 IRE will be “colored” in YELLOW.
■
Invert
The Clip function can also be inverted to filter the area between the Upper and Lower Threshold. The color selected for the Lower Threshold acts as the color for
all inverted Clip data.
In the image above, the Lower Threshold is set to 20 IRE and the Upper Threshold is set to 90 IRE. The Clip Invert will filter all data in between 20 IRE and 90 IRE and
color it RED.
■
Monochrome
Содержание V-LCD90MD
Страница 2: ...2 This page intentionally left blank ...
Страница 4: ...4 This page intentionally left blank ...
Страница 22: ...22 Dimensions ...