Marshall Electronics Orchid OR-2410, Руководство по эксплуатации

Страница: 11 / 39

Page 11 of 39
Rear Panel Features
AC Power Input and On/Off switch
Connect to 100 ~ 220 VAC power source. The switch will turn the internal power supply on
and off. When using an external 24vDC supply this switch will have no effect.
24VDC Power Input
Connect 24VDC to the 4-pin XLR power input connector. Power can be supplied a variety of
DC sources supplying at least 1.7 Amp at 24 Volts.
IMPORTANT: When using a 24VDC supply be sure that the polarity of the DC input is
correct:
Pin 1: GND
Pin 2: N/C
Pin 3: N/C
Pin 4: +24VDC
Main Power Switch
This switch is the Main power switch. When using the internal supply or an external DC
supply, this switch will control the On/Off status of the monitor. When using the internal
power supply both switches must be on.
GPI Input
RJ-45 connector for 7 user-assignable GPI inputs. Assignable using the on-screen menu.
Audio Input and Output Jacks
3.5mm stereo line level input and outputs for monitoring analog or embedded audio
channels. The desired audio channels are selected in the audio onscreen menu. The output
level is also controlled through the audio onscreen menu.