CV226 Manual
www.marshall-usa.com
5
6
3. WB CONTROL
• AUTO:
Controls the automatic adjustment of the light source’s color temperature to 3,000 ~
8,000°K.
• ATW:
Continuously adjusts camera color balance in accordance with any change in color
temperature. Compensates for color temperature changes within the range of 1,900 ~
11,000°K.
• PUSH:
Color temperature will be manually adjusted by pushing the OSD button. Place the
white paper in front of the camera when OSD button is pressed to Obtain the optimum result.
• MANUAL:
Select this fine-tune White Balance manually.
You can adjust the blue and red tone level manually.
»
COLOR TEMP:
Select color temperature from LOW, MIDDLE, or HIGH.
»
BLUE GAIN:
Adjust the Blue tone of the image.
»
RED GAIN:
Adjust the Red tone of the image.
COLOR TEMP
RED GAIN
BLUE GAIN
RETURN
MIDDLE
32
32
WB CONTROL
AE CONTROL
BACK LIGHT
IMAGE STABILIZER
IMAGE CONTROL
DISPLAY CONTROL
RESET
EXIT
ATW
OFF
ON
MENU
WB CONTROL
Adjust White Balance first by using the AUTO or ATW mode before switching to MANUAL mode.
White Balance may not work properly under the following conditions. In this case, select the ATW
mode.
• When the ambient illumination of the subject is dim.
• If the camera is directed towards a fluorescent light or is installed in place where illumination
changes dramatically, White Balance operation may become unstable.
Select WB CONTROL using the UP or DOWN button. You can change between AUTO, ATW, PUSH,
and MANUAL using the LEFT or RIGHT button
4. AE CONTROL
• MODE:
Select the desired exposure mode.
»
AUTO:
Exposure level is automatically controlled.
»
MANUAL:
Adjust BRIGHTNESS, GAIN, SHUTTER, and DSS manually.
»
SHUTTER:
Shutter can be set manually and DSS is controlled automatically.
»
FLICKERLESS:
Shutter and DSS is controlled automatically.
• BRIGHTNESS:
Adjust the brightness level.
• AGC LIMIT:
Controls the amplification/gain process automatically if the illumination falls under
the usable level.
Camera will raise up the gain to the selected gain limit under dark conditions.
• SHUTTER:
Controls the shutter speed.
• DSS:
When luminance condition is low, DSS can adjust the picture quality by maintaining the
light level. Slow shutter speed limited to x32.
Select AE CONTROL using the UP or DOWN button. You can select the AUTO, MANUAL, SHUTTER,
or FLICKERLESS mode from the sub menu.
MODE
BRIGHTNESS
AGC LIMIT
DSS
RETURN
AUTO
10
13
AUTO
OFF
WB CONTROL
AE CONTROL
BACK LIGHT
IMAGE STABILIZER
IMAGE CONTROL
DISPLAY CONTROL
RESET
EXIT
ATW
OFF
ON
MENU
AE CONTROL
