OWNER’S MANUAL -
RAH-123M, 183M
5
I
NSTALLATION REQUIREMENTS
Tools and Parts
Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools listed
here.
Tools Needed
Through-the-wall installation:
In addition to the tools listed above, the following tools are
needed for th
r
ough-the-wall installation.
Parts supplied (on some models)
Check that all parts are included in parts package.
Location Requirements
IMPORTANT:
Observe all governing codes and ordinances.
Check the location where air conditioner will be installed. Proper
installation is your responsibility. Make sure you have everything
necessary for correct installation.
The location should provide:
Grounded electrical outlet within 4 ft of where the power cord
exits the air conditioner.
Do not use an extension cord.
Free movement of air in room to be cooled.
A large enough opening for the air conditioner.
Adequate wall support for weight of air conditioner. Air
conditioner weighs between 94 and 103 lbs
IMPORTANT SAFETY INSTRUCTIONS
WARNING:
To reduce the risk of fire, electrical shock or injury when using your air conditioner, follow these basic precautions:
SAVE THESE INSTRUCTIONS
Unplug air conditioner before servicing.
Use two or more people to move and install air conditioner.
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Flat-blade and Phillips
screwdrivers
Level
Tape measure
Drill and ³
⁄
16
"or smaller bit
Saw
Wood preservative
Caulk
1" or thicker lumber
7 - #10 x 1" wood screws
A. Foam window sash seal
B. Window lock brackets (2)
C. #10 x
¹
4
4
8
⁄
"pan-head Phillips
screws (6)
D. #10 x
³
⁄
" pan-head
Phillips screws (3 or 7)
E. #10 x
³⁄
" round-head screws (6)
F. #10 x
1
/
2
" pan-head Phillips
screws (3)
G. Top channel
H. Side curtains (2)
I. Fo
J. Sill support (2)
Nut (2) Bolt (2) On some models
am seal
B
C
G
J
E F
A
H
D
I
Sill support (2)
Nut (2)
Bolt (2)
A.Cabinet louvers
A
.
On some models
WARNING:
NOTICE:
Installation parts are supplied for double-hung windows
up to 40" wide. A special Wide Window Kit is available from your
dealer or service center. See “Accessories.”
NOTICE:
Cabinet louvers must not be obstructed. Air must be
able to pass freely through the cabinet louvers.
5