Owner’s Manual -
Plastic Misting Pedestal Fan
5
TROUBLESHOOTING
1. Problem
Misting features sputters or does not mist at all.
Solution
• Ensure your outside water faucet is turned all the way on.
• Check the fan’s valve lever and make sure it is set open.
• Check water hose for kinks or buckles.
• The valves on the fan may be clogged. Follow the instructions in the “Misting Nozzles Maintenance” section on previous
page.
2. Problem
Fan will not run.
Solution
• Ensure the fan is plugged in.
• Check the GFCI on the fan’s plug. If the window is black, the GFCI has been tripped and needs to be reset.
• Press the “RESET” button on the plug. If the GFCI window is orange, then the circuit is active and does not need to be
reset.
3. Problem
Fan will not oscillate.
Solution
• Ensure the oscillation knob on the fan is pressed in.
4. Problem
GFCI continues to activate.
Solution
• Try using a different power outlet.
CLEANING
1. Be sure to unplug from the electrical supply source before cleaning.
2. Plastic parts should be cleaned with mild soap and a damp cloth or sponge, thoroughly to remove soap film with
clean water.
3. Be sure not to make water or other liquid enter inside of motor