Owner’s Manual -
Plastic Misting Pedestal Fan
2
IMPORTANT SAFETY INSTRUCTIONS
Read Rules for Safe Operation and Instructions Carefully
WARNING
1.
To reduce the risk of fire or electric shock, do not use this fan with any solid-state speed control device.
2. This product must be grounded. If it should malfunction or break down, grounding provides a path of least resistance
for electric current to reduce the risk of electric shock. This product is equipped with a cord having an equipment-
grounding conductor and a grounding plug. Plug into an appropriate outlet that is properly installed and grounded in
accordance with all local codes and ordinances.
3. This fan is provided with a ground fault circuit interrupter (GFCI) built into the plug of the power supply cord. This
device provides additional protection from the risk of electric shock. Should replacement of the plug or cord become
necessary, use only identical replacement parts that include GFCI protection.
4. Do not leave the fan running unattended.
5. This appliance equip with GFCI device, press the TEST button (then RESET button) every month to assure proper
operation.
RULES FOR SAFE OPERATION
1. Fan should be used under rated voltage.
2. Connect power after the fan is fully assembled.
3. Never insert fingers, pencils, or any other object through the grille when fan is running.
4. Unplug from outlet when: not in use, when moving fan from one location to another, before putting on or taking off
parts, and before cleaning.
5. Disconnect fan when removing grilles for cleaning
6. Be sure fan is on a stable surface when operating to avoid overturning.
7. DO NOT use fan in a window. Rain water may create an electrical hazard.
8. Do not operate any fan with a damaged cord or plug. Discard fan or return to an authorized service facility for
examination and/or repair.
9. Do not run cord under carpeting. Do not cover cord with throw rugs, runners or similar coverings. Do not route cord
under furniture or appliances. Arrange cord away from traffic area and where it will not be tripped over.
PARTS NAME
A. Front grill
B. Spinner
C. Fan blade
D. Plastic nut
E. Rear grill
F. Motor shaft
G. Clutch knob
H. Motor housing
I. Push button
J. Thumb screw
K. Power cord
L. Waterproof cover
M. Misting line holder
N. Internal pole
O. Height adjustment ring
P. External pole
Q. Misting line
R. Filter washer
S. Valve
T. Base
U. Screw
A
B
C
D
F
G
E
I
H
J
U
T
S
R
Q
L
M
P
O
K
N
Note: All the pictures in this manual are for explanation purpose only. Any discrepancy between
the real object and the illustration in the drawing shall be subject to the real subject.
