8
Customizing the Program
1)
Set the System switch to the
HEAT
or
COOL
position and the Fan switch to either the
AUTO
or
ON
posi-
tion. NOTE: In
AUTO
, the system blower will run only when the A/C or heat is running. In
ON
, the system
blower will operate continuously.
2)
Depress the
PROGRAM
key. The set point temperature will blink and the time will be dis-
played.
3)
Use the red/blue arrow keys to select the set point temperature for the Morning program
for Mon.
4)
While the temperature is still blinking, press the
TIME/DAY
key to set the time for the Morning program.
The time in the LCD will blink. Use the red/blue arrow keys to select the correct time.
5)
Set the remaining Morning, Day, Evening, and Night times and temperatures for each remaining day of the
week.
• Depress the
PROGRAM
key to select the desired period. (Each depression of this key cycles the menu
to the next period.)
• Depress the
Time/Day
key to switch between time settings and temperature settings at each period.
• Use the red/blue arrow keys to increase/decrease the time and temperature settings.
• The settings are automatically stored 15 seconds after the last touch of a key. NOTE: If the program-
ming at any period is not completed and the display stops blinking, depress the
PROGRAM
key as nec-
essary to cycle back to the desired period to be programmed.
•
This procedure is required to program both the
COOL
and
HEAT
system settings.
Temporary Hold
1)
Use the red/blue arrow keys to temporarily raise or lower the set point temperature at any time during nor-
mal operation. The temperature will hold at the new level UNTIL the next program period begins at which
point the thermostat will return to the program temperature.
70814-IM 12/22/06 2:00 PM Page 8
Содержание 70814
Страница 13: ...13 70814 IM 12 22 06 2 00 PM Page 13...
Страница 14: ...14 70814 IM 12 22 06 2 00 PM Page 14...