SOLO-NX
INSTALLATION MANUAL
Page 21
9.7.1
xTN1 to xTN5 parameters
Parameters are the call numbers for intercom application.
9.7.2
RTNx parameter
Parameter defines the ring time time-out. RTNx timer is started when the call button is pressed. If
the RTNx timer expires before the GSM voice connection is established then SOLO-NX device
calls the next number in XTN1-XTN5 call list.
9.7.3
DTMF auto dial functionality
This function is used to provide a support for SOLO-NX device to be able select extended numbers
via DTMF command.
9.7.3.1
SDNx parameter
Parameter is used to set the DTMF number in auto self-select function.
9.7.3.2
SDDx parameter
Parameter is used to set the delay (in sec.) for sending DTMF number in auto self-select function.
9.7.4
Time zone
Time zone support. When both time limits are sets (TZSx and TZEx) time zone functionality is ON.
When the current time is in the limits of the time zone parameters the button event calls the number
from xTN1 to xTN4, else button event calls xTN5.
9.7.4.1
TZSx parameter
Parameter is used to configure the start time for the time zone functionality - 24h time format.
9.7.4.2
TZEx parameter
Parameter is used to configure the end time for the time zone functionality - 24h time format.
9.7.5
Table of parameters
Name
Comment
ATN1
Button 1, Telephone number 1.
ATN2
Button 1, Telephone number 2.
ATN3
Button 1, Telephone number 3.
ATN4
Button 1, Telephone number 4.
ATN5
Button 1, Telephone number 5.
RTNA
Button 1, time out control for voice connection.
SDNA
Button 1, DTMF number to send.
SDDA
Button 1, delay for DTMF number to send.
TZSA
Button 1, time zone start period.
TZEA
Button 1, time zone end period.
