SOLO-NX
INSTALLATION MANUAL
Page 11
Example:
Direct programming on the SIM card
SOLO-NX PROGRAMMING TABLE
SIM CARD PHONE BOOK
Name
Number
Description
TN1
042376678 1st telephone number
LN1
13
Input 1 reports alarm to TN1 & TN3
LN2
1234
Input 2 reports alarm to TN1 & TN2 & TN3 & TN4
LN7
1
NAC event sent to TN1
LOT
60
Voice connection stay valid for max of 60s, after this time
Voice connection breaks
Table 4: Remote alarm reporting example
Remote programming by SMS
;TN1=042376678;LN1=13;LN2=1234;LN7=1;LOT=60;
9.1.3
CONTROLING OUTPUTS WITH DTMF
SOLO-NX can control the outputs with the use of DTMF. This is very useful function in the
intercom application.
To control the outputs the user must press the combination of 2 digits. First digit is used to select
the output (1 to 2), the second digit is used to activate (1) or deactivate (0) the output. There is a
special case when the user can select for first digit (output selection) number 0. In this case all
outputs control by the same time.
Combination must be pressed in 2s interval, and must be 3s apart to be valid.
NOTE
SOLO-NX must be in voice connection to support DTMF output control!
Example:
DTMF combination
Description
00
Deactivate ALL outputs
01
Activate ALL outputs
11
Activate output 1
10
Deactivate output 1 (if in latching mode)
21
Activate output 2
20
Deactivate output 2 (if in latching mode)
Table 5: DTMF control example
