ENGLISH
19
Parts
1. LCD
display
2.
Automatic mode med 6 settings
3. Repeat
4. Electrode
5.
Foot massage accessory (option)
6. Battery
7. Fastener
8.
Reduction of pulse frequency
9.
Increase of pulse frequency
10.
Manual mode med 4 settings
11. Switch/intensity
setting
USE
Preparations
1. Power
supply
-
Insert 3 x AA batteries in the battery compartment.
-
Connect the mains adapter to the unit and then plug the adapter into a power point.
2.
Connect the electrode leads.
Adjust to the required mode
1.
Auto: 6 automatic modes
2.
Manual: 4 manual modes
3.
Speed+: higher pulse frequency
4.
Speed-: lower pulse frequency
5.
Repeat: locking of the selected mode
Starting
1.
Remove the protective film from the electrodes and attach them to the body at the required place.
2.
Start the unit with the power switch (On/+).
Use
1.
Press the power switch (On/+). Automatic mode 1 (shoulder massage 15 minutes) ) is shown on
the display.
2.
Select the required intensity from 1 to 8. NOTE: Change the intensity gradually.
3. Modes
4.
Automatic modes for shoulders, waist, legs, arms, knees and feet. 4 manual treatment modes.
5.
Set the required pulse frequency with the Speed+ and Speed- buttons. 1 is the lowest and 8 is the
highest.
6.
The set mode can be locked with the Repeat button in automatic mode. Press Repeat again to
reactivate switching between modes.
NOTE:
Switch off the unit after use and store in a dry and safe place.
