Complete set of product disassembly
图1
图2
图3
图4
图5
QD01
1
Steps of disassembly
1.pull up power cable. As picture 1.
2.loose the nut, then pull up the famale plug .As picture 2.
3.loose the nut, pull up the conncetion between male and female
connector plug .As picture 3.
4.rotating tube, prevent it struked by shell of plastic. Then take
out tube. As picture 4.
6.rorating plastic shell and foot of bracket,make bracket in order
As picture 6.
5.disassemble the single bracket in the same way. As picture 5.
图6
松掉拧紧螺母
拔掉电源线
拔掉
4
芯母头
松掉拧紧螺母
拔掉
4
芯公母头
旋转灯管脱离卡住
旋转灯管后取出灯管
整齐的支架