1. From Scala2, click
Menu
> Expert Mode
and enter the password
copernic
.
2. Right-click the IP address of the receiver at the bottom of the page, then click
Configure Receiver
.
3. Click the name of the sensor in the system tree view.
4. In
Sensor Options
, click
Configure
in front of
Echograms
.
5. In
NBTE Echograms Filter
, select
Echosounder and Interference Reduction
Medium
or
Echosounder and Interference Reduction High
.
Here is an example of result when applying this filter:
1.
Noisy echogram with default filter (
Echosounder and Interference Reduction Low
)
2.
With
Echosounder and Interference Reduction High
filter applied.
Catch Navigator
| V1 |
Maintenance and Troubleshooting
58
