Marmitek TLV9600, Руководство пользователя

Страница: 34 / 136

28
Setting the Security Lock (Set Lock)
The security lock function is designed to prevent accidental stopping
of recording if the STOP button is pressed inadvertently.
1 Set the SET LOCK switch to “ON” position.
• “ “ is displayed on the display panel.
2 To cancel the security lock, set the SET LOCK switch to “OFF”
position.
• “ “ will be erased from the display panel.
Setting the SW Out Terminal Output
Synchronization pulses for multiplexers can be obtained from the
SW OUT terminal.
1 Press the MENU button, to display the initial menu.
2 Press the SHIFT button to move the arrow mark( ) to SW
OUT Terminal Set.
3 Press the SHIFT button to display the SW OUT TERMINAL
SET menu.
4 Press the SHIFT button to set “FIELD” (or “FRAME”).
• With each press of the SHIFT button, the setting will changes as
indicated below.
5 Press the SHIFT button, to select Timing.
6 Press the SHIFT button to set the “TIMING”.
• FIELD . . . 1 pulse is output after each set number of fields.
• FRAME . . 1 pulse is output after each set number frames.
7 Press the MENU button, the normal screen is displayed.
• The setting procedure is now complete.
✔
• While the security lock is
engaged, all commands are
disabled.
• The security lock should not be
engaged while a menu is
displayed.
✔
• If “TIMING” is set to FRAME
(see step 6), “FRAME” will be
indicated instead of “FIELD”.