Marmitek CONNECT 421, Руководство пользователя

Страница: 7 / 48

No proper 3D picture
• Check whether the HDMI source has been set to 3D and/or that this is set to
automatic.
• Both the HDMI source as well as the HD screen must support the same 3D formats.
• Check whether the proper 3D picture is reproduced by directly connecting the
HDMI source to the screen with an HDMI cable.
CEC function does not work
Check if the connected equipment supports the CEC functionality.
Every brand has its own name for this CEC function:
(Samsung); Aquos Link (Sharp); BRAVIA Link and BRAVIA Sync (Sony); HDMI-
CEC (Hitachi); E-link (AOC); Kuro Link (Pioneer); CE-Link and Regza Link (Toshiba);
RIHD (Remote Interactive over HDMI) (Onkyo); RuncoLink (Runco International);
SimpLink (LG); HDAVI Control, EZ-Sync, VIERA Link (Panasonic); EasyLink (Philips); and
NetCommand voor HDMI (Mitsubishi).
HEC/ARC function does not work
Check whether these functions are supported by your other HDMI equipment.
Do you have other questions that have not been resolved by the above information?
Please go to www.marmitek.com
TECHNICAL SPECIFICATIONS
Resolution
Supported HDTV Resolutions 480p, 576i, 576p, 720p, 1080i, 1080p
Supported PC Resolution (max.) 1920 x 1200
Supported 3D formats 1080p@23.98/24 Hz, 720p@59.94/60/50 Hz
Maximum Pixel Frequency (max.) 250 MHz
Maximum Bit Rate (max.) 7.5 Gbps (2.5 Gbps per channel)
Inputs and outputs
HDMI Input (19-pin female) 1 x HDMI (front), 3 x HDMI (back)
HDMI Output (19-pin female) 1 x HDMI
HDMI Ethernet 1 x Ethernet
Digital Audio Output 1 x optical (Toslink), 1x coaxial (RCA)
Stereo Audio Output 1 x stereo jack 3.5mm
Maximum HDMI cable length 15 meters
Remote control
Infrared remote control Including battery CR2025
7 CONNECT 421™
ENGLISH