Marley Primus P11, Руководство пользователя

Страница: 3 / 40

3
Preparation
The Marley Primus cooling tower purchased for this installation represents
the current state of the art in crossflow, induced draft cooling tower design.
Thermally and operationally, it is the most efficient cooling tower of its
class.
These instructions—as well as those offered separately on motors, fans,
float valves, etc.—are intended to assure that the tower serves you
properly for the maximum possible time. Since product warrantability may
well depend upon your actions, please read these instructions thoroughly
prior to operation.
If you have questions about the operation and/or maintenance of this
tower, and you don’t find the answers in this manual, please contact your
Marley sales representative.
When writing for information, or when ordering
parts, please mention tower serial number shown on the nameplate
located on the access door.
Safety First
The location and orientation of the cooling tower can affect the safety of
those responsible for installing, operating or maintaining the tower. However,
since Marley does not determine the location or orientation of the tower, we
cannot be responsible for addressing those safety issues that are affected
by the tower’s location or orientation.
The following safety issues should be considered by those responsible
for designing the tower installation.
• access to and from maintenance access doors
• the possible need for ladders (either portable or permanent) to
gain access to the distribution basin or maintenance access doors
• potential access problems due to obstructions surrounding the
tower
• lockout of mechanical equipment
• the possible need for safety cages around ladders
• the need to avoid exposing maintenance personnel to the potentially
unsafe environment inside the tower.
It is not intended nor assumed that access to the fan deck is needed
or necessary.
▲
▲ ▲
Warning
▲
▲ ▲
Note