Marlec Rutland 504 efurl, Руководство пользователя

Страница: 12 / 32

Rutland 504 Windcharger Installation & Operation
Doc No: SM-150 Issue C 17.03.14 12 Marlec Eng Co Ltd
Fig.7 x
The wind generator should be mounted at a safe height, a
minimum of 2 metres (6.5 feet) above the deck and away from
other obstacles which could interfere with the blades or tail
assembly (Fig. 7).
x
The Rutland 504 is designed to fit inside an aluminium or
stainless steel tube with an internal diameter of 31.7mm (1
1
/
4
”).
The external diameter must not exceed 38.1mm (1½”), see
Warnings!
x
Suitable tube: 1
1
/
2
“ 10 SWG aluminium or Stainless Steel
35mm x 1.5mm.
x
The Rutland 503/504 Mounting Kit is available for deck
mounting or short sections of stainless steel tube of 500mm &
1m pre-drilled are available to adapt to your own fabrication.
On Board Systems—Rutland 504 Windcharger Model
We suggest the following mountings according to preference and
site conditions:
Pushpit (Fig.8)
A suitable pole mounted to the deck with deck plates and rigid
stays is the most popular method of mounting the Windcharger
on yachts, e.g. Rutland 504 Marine Mounting Kit
CA-12/01 and
Marine Stays Kit CA-12/32 available from Marlec.
Mizzen (Fig.9)
Mizzen mounting is suitable on larger yachts, taking advantage of
greater wind flow the higher the wind turbine is mounted.
River Boats (Fig.10)
A pivot pole is ideal for river boats as the Wind charger can easily
be raised and lowered. The Rutland 503/504 Mounting Kit has a
hinge type deck fixing.
Fig.8
Fig.9
Fig.10