marklin 55175, Руководство пользователя

Страница: 9 / 20

9
CV Discription 6021 Value DCC Value
01 Adresse 01 - 80 (55)
1 - 127 (3)
CV 29/Bit5 =0
02 PoM Minimum Speed — 0 - 255 (25)
03 PoM Acceleration delay 01 - 63 0 - 255 (15)
04 PoM Braking delay 01 - 63 0 - 255 (15)
05 PoM Maximum speed 01 - 63 0 - 255 (255)
08 Factory Reset / Manufacturer Recognition 08 08 (131)
13 PoM Functions F1 - F8 in analog operation — 0 - 255 (0)
14 PoM Functions F9 - F15 and lights in analog operation — 0 - 255 (1)
17 Extended address (upper part CV29 Bit 5 = 1) — 193 - 255 (192)
18 Extended address (lower part CV29 Bit 5 = 1) — 0 - 255 (128)
19 Multiple Unit Address — 0 - 255 (0)
21 PoM Functions F1 - F8 on Multiple Unit — 0 - 255 (0)
22 PoM Functions F9 - F15 and lights on Multiple Unit — 0 - 255 (0)
29
Bit 0: Reversing direction
Bit 1: Number of speed levels 14 or 28/128
Bit 2: DCC operation with braking area
Bit 5: Address length 7 Bit / 14 Bit
—
0 / 1 (0)*
0 / 2 (2)*
0 / 4 (4)*
0 / 32 (0)*
mfx: Changes to the settings on the mfx decoder can be done with the buttons on the 60213/60214 Central Station. The procedure can be
found in the help file on the Central Station.
( ) Values = factory settings
DCC: programming on the programming track by means of CV programming, programming with PoM (Program on the Main); this must be supported by the
controller you are using.
* The values for the desired setting must be added! Example: The number of speed levels 28/128 = 2 + DCC operation with a braking route = 4, results in
the value = 6
5.