25
Spare parts1
50010 Vaporizing and Cleaning
Fluid
50019 Maintenance Oil
51020 Gear Lubricant
62204 Universal Motor with long
shaft
63120 Brushes with bushings,
8 pieces (2 packages needed)
63218 Standard Pick-Up Shoes,
2 pieces (2 packages needed)
68511 Plug-In Bulb, Clear, 5V,
10 pieces
69184 Traction Tire 46.5mm,
10 pieces
Accessories2
17010 EPL Loco Magnet
17050 Sound Trigger Magnet
17100 EPL Track Contact
55027 MTS Onboard Decoder III
(24811)
65011 Standing Sounds Power
Supply Unit 68513 Plug-In
Bulb, Clear, 24V
Index
1 = Spare part
2 = Accessories
3 = Switch-off option
4 = See Instructions for
Advanced Users
INSTRUCTIONS FOR ADVANCED
USERS
MTS Onboard Decoder
To change the functions of the MTS
Onboard Decoder as desired, config-
uration variables (CVs) can be pro-
grammed in the registers.
This option requires the following
equipment:
- 55045 MTS PC Decoder
Programming Module or
- 55015 Universal Remote Control Unit
Note:
For normal operation, it is not neces-
sary to change any function values.
Programming
Note:
Please consult the operating instruc-
tions for the
- 55045 MTS PC Decoder
Programming Module or
- 55015 Universal Remote Control
Unit
Original factory settings
- If programming results in unsatis-
factory operation, the original fac-
tory settings of the MTS Onboard
Decoder can be recovered for the
most important registers!
- To do this, enter function value 55
in register CV 55.
This also reprograms the loco
address to the factory-set value = 3.
Configuration using a 55015
Remote Control Unit
Procedure:
- Select programming mode
- Enter > “P”
- Display shows "P --"
- Enter > 6 - 5 - 5 and press right
arrow key
- Display shows "P --"
- Enter > 5 - 5 - 5 and press right
arrow key
Note:
The original factory settings have
now been recovered.
