7
4.Preparation of the roof elements (for example markilux 6000)
syncra uno with markilux 6000, 5010, 1500, 1550, skylife 2, 1200, 990
For syncra with markilux 3300, 3300 pur: Proceed directly with point 5!
1. Insert the square plug (1) in the transverse brace
(2). The outer edges of the roof elements (4) must
be capped off with the square plugs (1).
2. Lay the roof elements (4), arrange the spacing
and align.
3. Mark the positions of the roof brackets (3) on the
upper part of the roof elements ( 4 ) each time..
Drill through the plates and brackets from above
(Ø 4.2 mm).
4. Mark the roof elements (4) for later assembly and
remove again.
For syncra with markilux 1500, 1550 additional
brush seals (6) are glued under the roof elements.
1 Square plug
2
Cross beam
3 Roof bracket
4 Roof element
5 Slotted pan-head screw 4.8 x 13
6 Self-adhesive brush seal 8 mm
syncra uno with markilux 1500, 1550
7 Spirit level
8 Drill Ø 4.2
Dimensions in mm