9
6.1. Assembly of the transverse brace
(for example markilux 6000)
syncra uno with markilux 6000, 5010, 3300, 3300 pur, 1500, 1550, skylife 2, 1200
For syncra uno with markilux 990: see point 6.2
Dimensions in mm
Lower transverse brace (1) onto the posts' (6) upper
brackets. The distance of the cross beam's (1) outer
surface from the middle of the post should amount
to 55 mm (arrange the spacing if necessary
Subsequently tighten the four hexagonal head
screws (7).
1 Cross beam
6 Post
7 Hexagonal head screw M 16 x 120
8 Hexagonal nut M 16
9 Washer Ø 17
Dimensions in mm
6.2.
Installation of the transverse brace
syncra uno with markilux 990
Dimensions in mm
Lower the transverse brace (1) onto the posts' (2 or
6) upper brackets, the brackets (10) lie externally.
The distance of the transverse brace's ( 1 ) outer
surface from the middle of the post should amount
to 213 mm (arrange the spacing if necessary. Sub-
sequently tighten the four hexagonal head screws
(7).
1
Cross beam
6 Post
7 Hexagonal head screw M 16 x 120
8 Hexagonal nut M 16
9 Washer Ø 17
10 Bracket
Dimensions in mm