11
Mount covering elements
syncra uno with markilux 3300, 3300 pur
1. Unscrew the rear screws (1) of the awning's casing
cover (2).
2. Screw the frontal covering plate (3) to the awning
with the included slotted pan-head screws (4) (4.8 x
25) .
3. Remove the security foils (10) of the double-sides
tape of the rafters (9) and glue the rafters in equal
distances onto the cross beam (11) see image 1.
4. Lay the upper roof elements (5), align, mark and
drill [to brackets (12), rafters (9) and casing (2)]
and drill (Ø 4.2 mm). Screw with the slotted pan-
head screws (6) (4.8 x 13). The distance of the
drilled holes at the casing(2)should amount to be-
tween min. 300 mm and max. 700 mm.
5. Lay the coverboard additional profiles (7), align,
mark [to brackets (12) and rafters (9)] and drill (Ø
4.2 mm). Screw with the slotted pan-head screws
(6) (4.8 x 13).
6.
Pull the sealing profile (8) into the coverboard addi-
tional profiles (7).
1
Slotted pan-head screw 4.8 x 9.5
2
Lateral casing cover markilux
3300/3300 pur
3
Frontal covering element
4
Slotted pan-head screw 4.8 x 25
5
Roof element
6
Slotted pan-head screw 4.8 x 13
7
Coverboard with additional profile
8
Rubber sealing profile
9
Roof bracket
10 Protective foil double-sided tape
11 Cross beam
12 Bracket
Dimensions in mm