Markem Imaje 9232, Руководство пользователя, Страница: 109 / 185

the team to trust
Troubleshooting
108 A40051-B
21- „Ink„Empty 21a- „If„the„ink„cartridge„is„not„empty,„check„that„it„has„been„
inserted„correctly.
21b- „Replace„the„ink„cartridge„if„it„is„empty.
22- „Additive„Empty 22a- „If„the„additive„cartridge„is„not„empty,„check„that„it„has„
been„inserted„correctly.
22b- Replace„the„additive„cartridge„if„it„is„empty.
23- „Cooling„fan„Failure 23a- Check„that„nothing„is„blocking„the„fan„blades.
23b- „Make„sure„that„the„fans„are„clean„and„that„they„turn„
easily.
23c- „Contact„Markem-Imaje„technical„support.
24- „Low„additive„level The„printer„starts„using„the„ink„circuit’s„additive„tank.„The„
remaining„life„is„calculated„and„displayed„on„the„screen.
24a- „If„the„additive„cartridge„is„not„empty,„check„that„it„has„
been„inserted„correctly.
24b- „Replace„the„additive„cartridge„if„it„is„empty.
25- „Low„ink„level The„printer„starts„using„the„ink„circuit’s„ink„tank.„The„
remaining„life„is„calculated„and„displayed„on„the„screen.
25a- „If„the„ink„cartridge„is„not„empty,„check„that„it„has„been„
inserted„correctly.
25b- Replace„the„ink„cartridge„if„it„is„empty.
NOTE: this warning may also be caused by the air present
in the pipes after a part has been replaced.
26- „Motor„speed„out„of„range 26a- „Adjust„the„bypass„to„reach„a„motor„speed„of„1600„-„
1700„RPM
NOTE: this warning may also be caused by any additive
present after flushing the ink circuit.
27- „Ink„temperature„too„high 27a- „Check„that„the„ambient„temperature„is„not„too„high.
28- „Critical„additive„level 28a- If„the„additive„cartridge„is„not„empty,„check„that„it„has„
been„inserted„correctly.
28b- Replace„the„additive„cartridge„if„it„is„empty.