Marine Tech QM3814, Инструкция по эксплуатации

Страница: 13 / 16

12
BLUETOOTH®:
1. PAIRING CONNECT:
Turn the head unit on and enable Bluetooth® on your phone & search for
the Bluetooth® device called “CAR AUDIO”. Input the pairing password
“8888” and press OK. When the pairing connection is successful, the
display will show “BT ON” & the on the LCD, it will display BT ON, and
the Bluetooth® logo “ ” will stop blinking.
Note: The Bluetooth® system supports “HSP” “HFP” “A2DP” and
“AVRCP” Bluetooth® profiles.
2. HANDSFREE PHONE SERVICE:
If your mobile phone has paired with the unit, you can make calls from
your radio. All incoming calls will be transferred to the unit automatically
and the caller’s phone number will be displayed on the LCD screen.
• Press the BAND button to accept the call.
•
Press MUTE button to reject the call.
• Press MUTE button to hang up after the call as been accepted.
Note: The microphone is located on the front of the head unit.
3. ADVANCE AUDIO DISTRIBUTING PROFILE (A2DP) PLAYING:
Once your mobile phone has been connected to the unit via Bluetooth®,
press “MODE” button the display shows “A2DP”. Any music played from
your mobile phone will now be played through the head unit. “A2DP” will
display on LCD.
Press button “
” or “ ” in the panel to select the music track.
4. INTERRUPT BLUETOOTH® CONNECTION/RECONNECTION:
Pressing the BAND button during a phone call will interrupt the
Bluetooth® connection. This will prevent the phone call from being
played through the head unit. Press BAND button again to switch the
setting back to normal.