Marine Tech QM3814, Инструкция по эксплуатации

Страница: 7 / 16

6
GENERAL OPERATION:
DISPLAY:
Press the “DISP” button (4) to enter each display mode as listed below.
Time is displayed for 5 seconds when the “DISP” key is pressed, and it will
return to its previous display unless the key is pressed again. To adjust the
clock, press and hold the “DISP” key until the time on the display begins
flashing. The time can be changed by using the volume knob on the head
unit, or via the (+ /-) buttons on the remote control.
LOCAL RADIO STATION SEARCH:
Press the “SEL” button until “LOCAL(DX)” is displayed on the LCD of
the head unit. Rotate the VOL knob on the head unit, or use the VOL+/-
buttons on the remote control to switch between “LOCAL” and “DX”
modes. When the LOCAL function is enabled, only local stations with
weak reception will be picked up by the unit.
MONO/STEREO CONTROL (IN FM RADIO MODE):
Press “SEL” button repeatedly until the LCD display shows “STEREO
(MONO)”. Use either the VOL knob on the head unit, or the VOL+/-
buttons on the remote control to switch between STEREO and MONO.
The reception of audio can be improved by using MONO mode when
out at sea.
AREA SETUP:
In Radio mode, press and hold the “SEL” button until the LCD
flashes “AREA USA/EUR”. Use the “VOL” +/- buttons to change
the AREA frequency.
INPUT MODE:
Press the “MOD” button to enter the following input modes:
•
Tuner (radio)
• USB
(A USB stick must be inserted in order to enter this mode).
•
Memory Card
(An SD card must be inserted in order to enter this mode).
• AUX input