16
Solar shower UNO types 14
Instruction
The garden solar shower is designed as a column shaped body, its PP shell serves
as a hot water reservoir and at the same time it functions as a solar collector. This
shell is self - supporting. Inlet water armatures are located inside the column body.
Control lever, shower hose with head and shower head holder are located outside
the shower body. Column bottom part is furnished with installation base. There is
an inlet armature on column rear side.
The equipment is intended for operation in private objects as gardens, swimming
pool accessories or private tennis-court. It is intended for individual showering of
persons. It is not intended for commercial or public use.
Safety instructions mentioned herein are marked with general danger
symbols. These instructions must be followed, otherwise human health
might be endangered. Safety mark is according to ČSN ISO 3864.
Content of the packaging and basic parameters
Shower body, stand, shower head hose, shower head, fastening material, hose inlet
quick-release coupler, instructions for use and installation
Shower tank volume
14 l
Water input maximum pressure
3 bar
Height
1450 mm
Weight
5,4 kg
Anchor plate - 4x hole Ø 9 with pitch
130x130 mm
Safety instructions
It is necessary to respect all safety instructions mentioned in this manual!
This operating manual includes basic instructions that must be respected during
installation and operation of solar shower. Non-observance of safety instructions may
result not only in endangering of human health but also in danger for environment
and the equipment itself.
For hygienic reasons, drain the water from the solar shower before or after a longer
period of non-use. See paragraph Maintenance and Winterization. If the water in
EN
