MARIMEX 10992055, Инструкция

Страница: 37 / 52

37
EN
3. Pull out the 2-pin socket that connects the solar panel to the battery and reinstall
the cover of the shower head.
4. Install the shower head assembly on the shower body. Pay attention to the
direction of the installation of the shower head relative to the water adjustment
valve, put on the octagonal nut and tighten it.
5. Install the water pipe, put on the circlip and tighten it with a screwdriver.
Tighten the stainless steel
circlip.
6. First insert the two connectors of the solar panel and the battery connector to the
socket and then install the shower head cover.
7. Drill holes into the concrete floor or other hard ground. The layout of the holes is
shown in the drawing below. The diameter of the holes is 12 mm and the depth is
45 mm.
Install the shower head
cover.