MARIMEX 10992055, Инструкция

Страница: 35 / 52

35
EN
The garden solar shower is designed as a column-shaped body and its aluminium
housing serves as a hot water tank and a solar collector. This shell is self - supporting.
Inlet water armatures are located inside the column body. The product is equipped
with a sensor LED light with a solar panel. At night, the sensor light automatically lights
up when it detects that someone has come near the shower, and automatically goes
out when they leave.
The control lever, shower rosette and tap for washing feet are located outside of the
shower body. Column bottom part is furnished with installation base. There is an inlet
armature on column rear side.
The equipment is intended for operation in private objects as gardens, swimming pool
accessories or private tennis-court. It is intended for individual showering of persons.
It is not intended for commercial or public use.
Safety instructions mentioned herein are marked with general danger
symbols. These instructions must be followed, otherwise human health
might be endangered. Safety mark is according to ČSN ISO 3864.
Content of the packaging and basic parameters
The shower contains a solar shower body with installed lever valve, valve for washing
feet, shower head assembly with a LED light and a solar panel, hose inlet quick
coupling and Instructions for Use.
Specification:
Volume 35 l
Pipe material Aluminium alloy
Maximum working pressure 3.5 bar
Battery voltage 3.7 V
Battery capacity 2 000 mAh
LED light nominal voltage and
current
Voltage 3.7 V
Current 700 mA
LED light sensing area
Approx. 2 meters
Product dimensions
2 100 × 168 × 118 mm
Safety instructions
It is necessary to respect all safety instructions mentioned in this manual!
This operating manual includes basic instructions that must be respected during
installation and operation of solar shower. Non-observance of safety instructions may
result not only in endangering of human health but also in danger for environment and
the equipment itself.
Garden solar shower is intended only for personal showering. If it is used for other
purposes or when it is modified without permission of the producer, any rights for
reclamation become void. In such a case producer and seller waive any and all
responsibility for incurred damages. Persons not familiarized with operation of
solar shower within this manual are not allowed to use this equipment. Because of
temperature inside shower body which may reach 60 - 70°C we recommend to turn
the lever valve first to right and firstly open cold water. And after that mix with hot
water to required water temperature by turning the lever valve to left. In this way you
avoid undesirable showering with hot water! If the shower is not used for some time,
also small amount of water can be heated in supply hose to valve. Due to safe use it is
necessary to let out small amount of water (approx. 3 seconds). When exposed to direct
sunlight, do not touch the body of the shower to avoid burns. The children can use the
shower only when supervised by an adult.
Assembly instructions
Place the solar shower at a place with sufficient sunlight and within reach of water
supply. Install solar shower vertically onto a firm and horizontal base. Ideally using wall
plugs onto a concrete foot, ceramic tile or eventually using long nails into the earth.
1. Remove the shower and accessories from the box. Be careful not to scratch the
plating of the pipe.
2. Prepare a flathead screwdriver, insert it in the square hole located in the back of
the shower head and gently push it upwards to open the cover.