MARIMEX 10604267, Инструкция по установке

Страница: 63 / 92

63
Purpose
This filtration unit is designed for filtering water in seasonal aboveground pools.
It is not intended for year-round swimming pools. The filtration pump is not self-
-priming, so the filtration must be installed below the water level in the pool, with
natural water flooding.
NOTICE: The illustrations in this manual are for illustrative purposes only and may
differ from the actual product supplied. We reserve the right to change the produ-
ct as a whole or in part without prior notice.
Conditions for using the filter unit:
- pH value of water 6 - 8.5
- free chlorine content max. 10 mg/l
- dissolved salt content max. 0.5%
Before commissioning
Unpack all components before assembling and commissioning the device.
Keep a safe distance between the filter and the environment to allow the device
to be operated.
The filtration assembly must be placed on a base (for example, a concrete slab,
etc.). The slab should be laid and levelled with a spirit level. The device must not
stand in the grass, there is a risk of overheating of the pump and other damages
(fire).
Avoid flooding the device. Flooding could damage the equipment or endanger
people with electric shock.
If you have partially or completely embedded the pool, it is necessary to place the
filter device in the filter shaft, which will be connected to the pool. If your filtrati-
on is placed in a shaft, make sure that the shaft cannot be flooded with water. To
prevent this, it is a good idea to scatter the shaft with gravel to absorb less water
and create a drain directly into the sewer. It is important to ensure ventilation of
the shaft; due to condensation of water, the device can be damaged.
Necessary accessories such as additional hoses, hose clamps and filter sand (not
included) are available from your dealer.
Filtration must not work dry (without water) !!! If filtration is used in
this way, the warranty becomes void.
EN